Skip to Content
EGO Power+ Support
ChainsawsProper Techniques for Basic Felling, Limbing, and Cross-Cutting

Chainsaws

Here, you'll find support for your Chainsaw

Proper Techniques for Basic Felling, Limbing, and Cross-Cutting

Instructions Concerning the Proper Techniques for Basic Felling, Limbing, and Cross-Cutting

Warnings:

  • WARNING: Always be sure of your footing and hold the chain saw firmly with both hands while the motor is running.

  • WARNING: When the saw chain is stopped due to pinching during cutting, release the trigger switch; remove the saw chain and guide bar from the wood, then restart the chain saw.

  • WARNING: Do not pull the saw chain with your hand when it is bound by the sawdust. Serious injury could result if the chain saw starts accidentally. Press the saw chain against the wood, move the chain saw back and forth to discharge the debris. Always remove the battery pack before cleaning. Wear heavy protective gloves when handling the saw chain.

  • WARNING: Never start the chain saw when it is in contact with the wood. Always allow the chain saw to reach full speed before applying the saw to the wood.

Was this helpful?

Need more help?

Ask a different questionChainsaws
Select a different product
Copyright © 2025 EGO POWERSitemap
Our StoryEGO NewsManuals and Safety Sheets
Where to BuyPrivacy PolicyWarranty Policy
FacebookInstagramYoutubeLinkedIn