STARTING/STOPPING THE POWER HEAD

WARNING:

NEVER OPERATE THE POWER HEAD WITHOUT AN ATTACHMENT.
Do not attempt to start the power head without an attachment.

To Start the Power Head (Fig. F)

1. Move the lock-off lever forward and then press the variable-speed trigger. The power head will start.

2. The rotational speed of the machine is controlled with the variable-speed trigger:

   • More pressure on the trigger increases speed.

   • Less pressure decreases speed.
     Adjust the speed to suit the task at hand.

NOTE:

The motor starts only when the lock-off lever is moved forward and the variable-speed trigger is pressed at the same time.

Fig. F - Parts Description

To Stop the Power Head

Move the attachment away from the cutting area and release the variable-speed trigger to stop the power head.

⚠ WARNING:

Always remove the battery pack from the power head during work breaks and after finishing work.

Changing Speed Mode (Fig. G)

This machine features three speed modes.

• The speed mode changes with every press of the speed mode button.

• The speed indicator displays the active speed mode:

  • One light = Low speed

  • Two lights = Medium speed

  • Three lights = High speed

The low speed mode provides better control and longer operating time per charge.

NOTE:

• The speed mode can be set before the machine is turned on or during operation.

• When the machine is restarted after a break, the previous speed mode will be retained.

Fig. G - Parts Description

Was this helpful?