Skip to ContentHere, you'll find support for your Robot Mower.
Robot Mowers
How to Install the Charging Station
CAUTION: Do not put your feet on the charging station base.
WARNING: Ensure the plugs of the low-voltage cable and the power supply are clean and dry before connecting them.
When connecting the power supply, only use a power outlet connected to a residual-current (RCD) device.
Was this helpful?
1
Connect the low-voltage cable to the charging station (Fig. Q1)
2
Connect the power supply to the low-voltage cable
3
Put the power supply at a minimum height of 30 cm (Fig. Q2)
4
Connect the power supply cable to a 100-240 V power outlet
5
Put the low-voltage cable in the ground with stakes or bury the cable
Refer to 5 To put the wire into position with stakes or 6 To bury the boundary wire.
6
Attach the charging station to the ground with the supplied 6 screws
NOTE: Once the charging station is connected, the product can be charged. Place the product in the charging station while the boundary wire is being laid. Switch ON the product. Do not continue with any product settings before the installation is completed.