BEFORE STARTING THE PRODUCT

1. Ensure the product charge is more than 50% for the first time.

2. Verify that the LED status indicator on the charging station shows solid or flashing GREEN for a correct installation.

3. Confirm the product operates within the set schedule. Refer to 10.3.2 To set the schedule.

   • Pressing the START button outside scheduled work times keeps the machine in the station until the next schedule operation.

   • The product operates immediately if setting the override schedule. Refer to 10.3.5 To override schedule.

4. Ensure the product is in the selected work area (refer to 10.5 Operation Mode Setting).

5. Confirm the product is within the boundary wire.

TO START THE PRODUCT

1. Push the STOP button to open the LCD screen cover.

2. Press the POWER button to switch ON the product.

3. Enter the PIN code.

4. Press the START button and close the cover.

NOTE:

• Always press the START button before closing the cover to start the product.

• Before the first operation, the machine needs to complete the mapping cycle.

Was this helpful?